Logic - Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual

Remote Function List

■ LOGIC:

On the 01X, set Remote Select (page 87) in the Utility mode to "LOGIC."
Button
In all modes:
[NAME/VALUE]
[SHIFT]+[NAME/VALUE]
[PAGE SHIFT]+DISPLAY [
Cursor [ / ]
(Multi Channel View)
(Parameters other than PAN/NSTRUMENT
mode)
[SHIFT]+[REMOTE]
[SEL] (in normal status)
[SEL] ([SEL] flashes)
[SEL] ([AUTO EDIT] lights)
[ON] (in normal status)
[SHIFT]+[ON] (in normal status)
[ON] ([SOLO] lights)
[SHIFT]+[ON] ([SOLO] lights)
[ON] ([REC RDY] lights)
[SHIFT]+[ON] ([REC RDY] lights)
[ON] ([AUTO R/W] lights)
[SHIFT]+[ON] ([AUTO R/W] lights)
[AUTO EDIT]
[SOLO]
[REC RDY]
[AUTO R/W]
[AUDIO]
[INST]
[MIDI]
[BUS/AUX]
[OTHER]
BANK [</>]
[SHIFT]+BANK [</>]
[FLIP]
[SHIFT]+[FLIP]
[EDIT]
[SHIFT]+[EDIT]
[LOOP]
[SHIFT]+[LOOP]
[F1] – [F7]
[SHIFT]+[F1]
[SHIFT]+[F2]
[SHIFT]+[F3]
[SHIFT]+[F4]
[SHIFT]+[F5]
[SHIFT]+[F6]
[SHIFT]+[F7]
[SHIFT]+[F8]
[UNDO]
[SHIFT]+[UNDO]
106
01X Owner's Manual
Changes the indication of the parameter name and its value.
Changes the meter display mode.
/ ]
Changes the Slot number.
Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-
cel the mode.
Selects a channel.
Fader touch-out (page 15)
Fader touch-in (page 15)
Turns each channel off or on (mutes/unmutes the signal).
Turns all the channels on.
Sets Solo for each channel to on or off.
Sets Solo for all channels to off (excepting the master channel).
Sets the REC RDY of each channel to on or off.
Sets REC RDY for all channels to off (excepting the master channel).
Switches the automation status of the selected channel (only that channel) in order:
Latch, Touch, Read and Off.
Switches the automation status (Read/Off) of all channels.
Changes the function of the [SEL] button to the touch-in function. This button flashes
during automation touch-in.
Changes the function of the [ON] button to the Solo function.
Changes the function of the [ON] button to the REC RDY function.
Changes the function of the [ON] button to the AUTO R/W function.
Makes the Global View mode active and displays the Audio track with the Multi Channel
view. Pressing this again restores the normal track display.
Makes the Global View mode active and displays the Audio Instrument track with the
Multi Channel view. Pressing this again restores the normal track display.
Makes the Global View mode active and displays the MIDI track with the Multi Channel
view. Pressing this again restores the normal track display.
Makes the Global View mode active and displays the AUX object, BUS object, AUDIO
OUTPUT object with the Multi Channel view.
Pressing this alternates among the following displays, in order: Bus Track, Aux Track,
Output Track and Normal Track.
Makes the Global View mode active and displays the AUDIO INPUT object with the
Multi Channel view. Pressing this again restores the normal track display.
Scrolls through the track indication every eight channels.
Scrolls through the track indication channel-by-channel.
Exchanges the functions between the Channel Knobs and the Faders.
Assigns the function of the Channel Knob to the Fader.
Turns Nudge on or off.
Enters the Nudge Option mode.
Turns Loop on or off.
Enters the Cycle Option mode.
Calls up Screen Sets 1 – 7.
Brings the Track View window to the front of the computer screen.
Displays the Mixer window
Displays the List window.
Closes the current window.
Displays the Piano Roll window.
Displays the Score window
Displays the Audio window
Shows the Transport Bar.
Executes the Undo operation.
Executes the Redo operation.
Function
Notes
LED
(page 114)
—
—
—
flashes *5
lights/goes out *1, 2
flashes ➝
goes out
flashes
lights/goes out *1, 2
lights *1, 2, 6, 7
lights/goes out *2
goes out *2
lights/goes out *2
goes out *2
lights/goes out *2
lights/goes out *2, 7, 8
lights
lights
lights
lights
lights *9
lights *9
lights *9
lights *9
lights *9
—
—
lights
flashes
lights/goes out
—
lights/goes out
—
—
—
—
—
—
—
—
—
—
—
—