Installing the CRW2200E Drive
6 6 6 6 As a supplemental drive
Remove the front cover of a vacant 5.25-inch drive bay slot in the computer.
As a replacement drive
Disconnect all the cables connected to the rear of the existing CD-ROM drive,
and also disconnect the audio cable from the sound card or motherboard's audio
connector. Remove the CD-ROM of your computer.
Audio cable
Notes
• The existing CD-ROM drive in the computer is assumed to be an IDE-type.
• Do not apply excessive force to the CD-ROM drive.
5.25-inch drive bay slot
IDE cable
Setup Procedures
Front cover
4-pin power cable
18