Huawei USG6000 Upgrade Manual page 22

HUAWEI USG6000&USG9500
Upgrade Guide
The command
ospfv3 bfd { min-transmit-
interval min-transmit-value |
min-receive-interval min-
receive-value | detect-
multiplier detect-multiplier-
value } * [ instance
instance-id ]
undo bfd all-interfaces
enable
undo bfd all-interfaces
{ min-transmit-interval
[ min-transmit-value ] | min-
receive-interval [ min-
receive-value ] | detect-
multiplier [ detect-
multiplier-value ] } *
ospfv3 bfd { min-transmit-
interval min-transmit-value |
min-receive-interval min-
receive-value | detect-
multiplier detect-multiplier-
value } * [ instance
instance-id ]
[ undo ]ppp accm { accm |
enable }
ip route-static track bfd-
session session-name bfd-
name admindown invalid
Issue 01 (2018-01-16)
Description
The command enables the
bidirectional forwarding
detection (BFD) on the
specified interface enabled
with OSPFv3, or sets the
parameter values of a BFD
session.
The command enables BFD
for OSPF in an OSPF
progress and sets BFD
session parameters.
The command disables BFD
for OSPFv3 or unconfigures
BFD specific parameters for
OSPFv3. By default, BFD is
not enabled or configured at
OSPFv3 process level.
The command deletes the
BFD on the specified
interface, or restores the
default parameter values of
a BFD session. By default,
BFD is not enabled at
OSPFv3 interface level.
The command enables/
disables the PPP ACCM
function.
The command disables the
static route bound to a
specific BFD session from
participating in route
selection when the BFD
session is Admin down.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
Impact
None
None
None
None
None
None
13