Configuring Dynamic Warning Messages For Wind In The Ktp700 Wincc Project - Siemens SIMATIC HMI KTP400 Manual

4 Installation and Commissioning
4.3.5 Configuring dynamic warning messages for wind in the KTP700
WinCC project
In the WinCC project for the KTP700, 4 different dynamic warning messages for
wind have been configured. One of the 4 warning messages is displayed
depending on the wind speed:
Overview of warning messages
Table 4-8
No. Wind level
1. Weak wind
2. Moderate wind
3. Fresh wind
4. Strong wind
Individually adjust and modify warning messages
Warning message texts, thresholds and colors can be modified and adjusted to the
requirements of the application at any time.
The table below shows which parameters to set in WinCC to change the warning
messages.
Table 4-9
No. Action/response
1. 1. Start WinCC Basic V13
2. Select your unzipped
project "68585344_
LOGO!_Set11_HMI_
WinCC_V20" with
"Browse".
3. Then click "Open".
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1,
Speed
>= 1 km/h Weak wind:
(Wind speed) km/h
Blinds can still be operated!
>= 20 km/h Moderate wind:
(Wind speed) km/h!
Blinds will remain closed!
>= 30 km/h Fresh wind:
(Wind speed) km/h!
Blinds will remain closed!
>= 40 km/h Strong wind:
(Wind speed) km/h!
Blinds will remain closed!
09/2018
Warning message text
WinCC Basic
Warning
message
color
23