Commissioning; Basic Settings For The Ktp400 - Siemens SIMATIC HMI KTP400 Manual

4 Installation and Commissioning
4.3

Commissioning

Note
For the following points you find information in LOGO! Set 9:
For LOGO! Set 9 refer to the following entry:
Building Automation Systems: House control with LOGO! and Master-Slave
communication (LOGO! Set 9)
https://support.industry.siemens.com/cs/ww/en/view/64143308
4.3.1

Basic settings for the KTP400

Note The IP address of the HMI panel can only be changed if Runtime has been
"stopped".
Table 4-4
No. Action/response
7. Switch on the KTP400.
8. Press "Settings" to open the panel settings.
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1,

Download LOGO! program in LOGO! controller

Settings for web server access
09/2018
KTP400 display
16