Samsung OfficeServ 7100 Technical Manual page 39

OfficeServ 7100
TECHNICAL MANUAL
Ports & LEDs Function Description
IPC LED This LED indicates that this card is inter-working with the higher-level
module.
- On: The card is inter-working with the MP10.
- Off: The card is not inter-working with the MP10.
CLK LED This LED indicates whether this card is a master or slave.
- On: The card has received the synchronization clock from the counterpart
station.
- Off: Using synchronous clock for internal clock.
TP1 LED This LED indicates whether the T1 is established.
- This LED turns on once the T1 is established.
TP2 LED This LED indicates whether the PRI is connected.
- This LED turns on once the PRI is connected.
Refer to section 6.2.2 for Port Pinout and Wiring.
3.5.2 8TRK
The 8TRK card provides 8 ports for analog trunk lines with Caller ID capabilities. This
card can go into any universal slot (1 ~ 2). Add as many as needed.
FRONT VIEW OF 8TRK CARD
The front view of the 8TRK card is shown in the picture below.
Figure 3.22 Front View of the 8TRK Card
3.22
Table of Contents
Home Page
INSTALLATION
PART 3 APRIL 2007