Consideration of Linux Installation
5.2.5 Using a LUN of a non-boot disk
To use a LUN of a non-boot disk such as a data disk, you need to change settings on the ETERNUS side after operating
system installation.
For details on the settings required on the ETERNUS when connecting to it, see the ETERNUS manuals at the following
website:
http://www.fujitsu.com/global/support/products/computing/storage/disk/manuals/
5.2.6 Using other disks
To use the system while USB memory or another device recognized as a hard disk is mounted, the disk must be
configured as a non-bootable device. Devices that are recognized as hard disks are added to the [Set Legacy HardDisk
Drive Order] menu.
C122-E206-04EN
112