Bosch HCP56652UC Installation Manual page 5

Connect your extractor hood
Step 2.1:
to your WLAN home network (Wi-Fi) with
WPS
Please enter step 2.1 only when prompted to by the app.
The following steps describe operations at the home
appliance itself.
Note:
To connect the hood to your home network, the
hood and the light must be off. You can cancel the
process at any time by pressing "0".
1 | Press and hold the "CONNECT" button until "on/off" and
"CONNECT" flash.
1
Press "1".
2 |
2
D D
"1" and "CONNECT" will flash.
3 | Activate the WPS function on your home network router
within the next 2 minutes.
Please consult your router's manual to locate the
WPS button.
D D
When "CONNECT" and "3" flashes your hood is connected
to the home network.
4 | Follow the instructions in the app.
Information:
If the connection could not be established within
2 minutes, make sure your extractor hood is within
the range of your WLAN home network (Wi-Fi).
For some appliances the WPS mode is also called
"automatic mode".
EN
5