Table of Contents
Advertisement
Safety Instructions
1–6
The following protective measures must be observed for modules and com-
ponents sensitive to electrostatic discharge (ESD)!
D Personnel responsible for storage, transport, and handling must have
training in ESD protection.
D ESD-sensitive components must be stored and transported in the pre-
scribed protective packaging.
D ESD-sensitive components may only be handled at special ESD-work-
places.
D Personnel, working surfaces, as well as all equipment and tools which
may come into contact with ESD-sensitive components must have the
same potential (e.g. by grounding).
D Wear an approved grounding bracelet. The grounding bracelet must be
connected with the working surface through a cable with an integrated
1 MW resistor.
D ESD-sensitive components may by no means come into contact with
chargeable objects, including most plastic materials.
D When ESD-sensitive components are installed in or removed from equip-
ment, the equipment must be de-energized.
1070 073 826-101 (01.10) GB
Advertisement
Table of Contents
