Nokia 30 GSM Connectivity Terminal At Command Manual page 68

0
3
<bm> the rules for storing received CBMs depend on its data coding scheme (refer
GSM 03.38), the setting of the Select CBM Types (+CSCB) and this value:
0
2
3
<ds>:
0
1
SMS-DELIVERs (except for class 2 messages and messages in
the message-waiting indication group [store message]) are routed
directly to the TE using an unsolicited result code:
•
+CMT: <length><CR><LF><pdu> (PDU mode enabled) or
•
+CMT:
<oa>,<scts>[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,
<length>]<CR><LF><data> (text mode enabled; about
parameters in italics, refer to the command Show Text
Mode Parameters +CSDH)
Class 2 messages and messages in the message waiting
indication group (store message) result in an indication as defined
in <mt>=1.
Class 3 SMS-DELIVERs are routed directly to the TE using
unsolicited result codes defined in <mt>=2. The messages of
other data coding schemes result in an indication as defined in
<mt>=1.
No CBM indications are routed to the TE.
New CBMs are routed directly to the TE using an unsolicited result
code:
•
+CBM: <length><CR><LF><pdu> (PDU mode enabled) or
•
+CBM:
<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
(textmode enabled)
Class 3 CBMs are routed directly to the TE using unsolicited result
codes defined in <bm>=2. If the CBM storage is supported, the
messages of other classes result in an indication as defined in
<bm>=1.
No SMS-STATUS-REPORTs are routed to the TE.
SMS-STATUS-REPORTs are routed to the TE using an
unsolicited result code:
+CDS: <length><CR><LF><pdu> (PDU mode enabled)
or
+CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st> (text mode
enabled)
61/107