P Select Pulse Dialling; A Answer Response - Nokia 30 GSM Connectivity Terminal At Command Manual

6.1.3 P Select pulse dialling

Command
Execute P
The P command is ignored. Implementation is according to GSM 07.07 section 6.18.

6.1.4 A Answer response

Command
Execute A
A command instructs the Nokia 30 to immediately connect to the line and to start the phone
call. Any additional commands that appear after A on the same command line are ignored.
Not all the result codes are in V.25ter. Before one of the above codes can be returned, some
of the following may precede it/them: +CR (or CARRIER), +DR, or +ILRR (in that order). The
answer command is also used to control alternating mode calls (see GSM 07.07 section 6.6).
Possible verbose Numeric
result codes (V1) (V0)
CONNECT 1
CONNECT 1200 5
CONNECT 2400 10
CONNECT 4800 11
CONNECT 9600 12
CONNECT 14400 17
CONNECT 19200 18
CONNECT 28800 19
CONNECT 38400 20
CONNECT 48000 21
CONNECT 56000 22
ERROR 4
CARRIER 16
NO CARRIER 3
OK 0
Description
Data/fax call established; rate 300 bps (or X
forbids rate display)
Data/fax call established; rate 1200 bps
Data/fax call established; rate 2400 bps
Data/fax call established; rate 4800 bps
Data/fax call established; rate 9600 bps
Data call established; rate 14400 bps
Data call established; rate 19200 bps
Data call established; rate 28800 bps
Data call established; rate 38400 bps
Data call established; rate 48000 bps
Data call established; rate 56000 bps
Command cannot be carried out
Call will be established
Call could not be established
Command aborted
19/107