11.1.1 Electronic Control Board
Accessibility
Step: 1
Detach the connectors from the Electronic Control Board
(See Fig.1), Cycle Selector (Switch, 8 positions) and
Temperature Selector (Switch, Option 3 pos.) (See Fig. 2).
Step: 2
Loosen the screws (4) (See Fig. 3), which is fitted with the
Control Panel console to separate the Electronic Control
Board Assembly from the console.
11.1.2 Program Selector
Accessibility
Step: 1
Remove the Program Selector knob from the console as
shown in Figs. (1a and 1b).
Step: 2
Detach the connector from Cycle Selector Switch (See Fig.
2) and unfasten the (2) snaps to remove the switch from the
console (See Fig. 3).
11.1.3 Temperature Selector
Accessibility
Step: 1
Remove the Temperature Selector knob from the console
as shown in Figs. (1a and 1b).
103