Mounting The Ait Library In The Rack - Sony ACY-RK81 Operating Instructions Manual

Mounting the AIT Library
in the Rack
Insert the library to the rack and secure it in place.
Caution
The AIT library weighs approximately 13.5 kg/29.8 lbs.
At least two people are needed in order to handle the
library. Handling the AIT library on your own could
result in back injury or other accidents resulting in injury
or damage to the AIT library.
1
Pull the straight rails out from the rail assemblies.
2
Have two or more people lift the library, fit the inner
rails into the rail assemblies, and then slide the
inner rails to the locking arm position.
The library will not slide past the locking arm
position.
Inner rail
14

Mounting the AIT Library in the Rack

Rail assembly
Locking arm
3
Release the locking arm and slide the library
completely into the rack.
On the right, lower the locking arm to release the
lock.
On the left, lift the locking arm to release the lock.
4
Hand tighten the screw on one of the L-shaped
brackets on the front of the rack so that the library
is secured in place.
5
Hand tighten the screw on the other L-shaped
bracket the same manner.
6
Confirm that the library is housed properly in the
rack.
Once the library is mounted in the rack, connect the
power cord and the SCSI cables and make all
necessary settings as described in the operating
instructions (PDF).
Locking arm
Fastener