HP A10500 Series Manual page 43

****************************************************************************
*
*
*
****************************************************************************
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
BASIC CPLD Version
EXTEND CPLD Version : 0.0
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/ A10500.bin!................
.........................................................................
The main application file is self-decompressing.............................
............................................................................
..Done!
System application is starting...
Starting to get the main application file--flash:/ A10500.bin!................
..........................................................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
.....Done!
System application is starting...
User interface aux0 is available.
Press ENTER to get started.
Press Enter at the prompt. When the prompt
NOTE:
After powering on the switch, check the following items:
x
The cooling system is working, and you can hear fan rotating noise and feel air being blown out.
x
The system status LEDs on the MPUs show that the system is operating normally. For more information
about LED behaviors, see the chapter "Appendix C LEDs."
BootWare, Version 1.00
: Jul 1 2010
: XLS408
: 32KB
: 1000MHz
: DDR2 SDRAM
: 1024MB
: 533MHz
: 508KB
: 128MB
: 0.0
: Ver.A
<Sysname>
40
appears, you can configure the switch.
*
*
*