Refresh Cycle Monitor; Figure 4-27 Refresh Cycle Monitor Window - Hitachi J.NET User Manual

4. Operation

4.2.7 Refresh cycle monitor

Function: Monitors the refresh cycle.
Operation: The following describes the operation procedure.
(1) In the main window (Figure 4-8), click the Refresh cycle monitor button.
(2) The Refresh cycle monitor window (Figure 4-27) appears.
Current value of the refresh cycle
The current value of the refresh cycle is displayed as a decimal number (unit: ms). SET DATA indicates
the setting value of the refresh cycle as a decimal number (unit: ms). If a module is not mounted, both
the current value and setting value are displayed as ****.
(3) To start monitoring, click the Start monitoring button. After monitoring starts, the Start monitoring
button changes to the Stop monitoring button.
(4) To stop monitoring in the monitoring status, click the Stop monitoring button. After monitoring stops,
the Stop monitoring button changes to the Start monitoring button.
(5) To close the Refresh cycle monitor window, click the Close button.

Figure 4-27 Refresh cycle monitor window

Setting value of the refresh cycle
4-32