Hitachi J.NET User Manual page 64

4. Operation
To reset the PCs, click the OK button. If you do not want to reset the PCs, click the Cancel button.
In this case, the parameters prior to write are used in communication until the PCs are reset.
(3) If PCs are reset successfully, the message PCs reset succeeded. appears. Then, the J.NET
module begins communication by using the written parameters.
If reset of the PCs fails, the message PCs reset failed. appears. In this case, manually reset the
PCs or perform a power-on reset. For details about how to manually reset the PCs, see 8.4.3.5
Online menu: Remote reset in the S10VE User's Manual General Description (manual number SEE-
1-001).
Notice
● Until the PCs are reset, the parameters written to the CPU modules do not take effect. If you do not
reset the PCs, or if reset of the PCs fails, manually reset the PCs, or perform a power-on reset.
4-29