Toro 07068 Operator's Manual page 10

3
Installing the Hitch Tongue
Parts needed for this procedure:
1 Hitch tongue
1 Hitch pin
1 Bolt (3/8 x 1-1/4 inch)
1 Nut (3/8-16)
1 Large washer
1 Large nut
1 Square-head set screw
Procedure
Note: This procedure requires 2 people.
1. Hitch tongue
2. Hitch pin
3. Bolt (3/8 x 1–1/4 inch) and locknut (3/8 inch)
1. Insert the rear end of the hitch tongue between the
mounting plates on the sweeper while aligning the
mounting holes
Note: The hose guides are to be positioned on top
of hitch tongue.
2. Insert the hitch pin through the mounting plates and
the hitch tongue
3. Secure the top of the hitch pin to the mounting plate
with a bolt (3/8 x 1-1/4 inch) and a locknut (3/8 inch)
(Figure 3).
4. Secure the bottom of the hitch pin with a large washer,
large nut and square-head set screw
Figure 3
4. Large nut and square-head set screw
5. Large washer
10
(Figure 3).
(Figure 3).
(Figure 3).