GE 4PE350A3 Instructions Manual page 20

EBI-6351
COLOR CAMERA
Blue Video:
0.7 volt ± 0.1 peak -to -peak.
Green Video:
0.7 volt ± 0.1 peak -to -peak.
Luminance Video:
0.7 volt ± 0.1 peak -to -peak.
Auxiliary Video:
0.7 volt + 0.1 peak -to -peak.
3. Signal Outputs
Auxiliary Monitor Output:
0.7 volt peak -to -peak into 75 ohms.
Viewfinder Output:
0.7 volt peak -to -peak.
MECHANICAL
Width:
Height:
8.00 inches
2.50 inches
0.875 inch
Sync Adder Board, PL -7782689
ELECTRICAL
1. Power Input
-20 volts d -c.
2. Signal Input
60 -volt peak -to -peak pulses (from the
viewfinder sweep board).
3. Signal Output
Typically 0.5 to 1.0 volt peak -to -peak
pulses.
MECHANICAL
Length:
Width:
Height:
6
1.90 inches
1.40 inches
1.00 inch
Viewfinder Video Amplifier Board,
PL -7672681G3
ELECTRICAL
1. Power Inputs
+100 volts d -c.
+20 volts d -c.
-6 volts d -c.
2. Signal Input
Noncomposite video signal (white posi-
tive), with an amplitude of between 0.3 and
0.7 volt peak -to -peak (adjustable with view-
finder CONTRAST control.)
3. Signal Output
Noncomposite high -impedance video
signal (white negative), with an amplitude
of 50 volts nominal peak -to -peak.
MECHANICAL
Length:
Width:
Height:
6.125 inches
2,50 inches
1.00 inch
Viewfinder Sweep Board, PL -7673797G2
ELECTRICAL
1. Power Inputs
+100 volts d -c.
+20 volts d -c.
-20 volts d -c.
-1.5 volts d -c.
2. Signal Inputs
Horizontal Sine Wave:
Greater than 20 volts peak -to -peak.
Vertical Drive:
4.0 volts + 0.5 peak -to -peak.
3. Signal Outputs
Horizontal Sweep:
Sweep WIDTH control set fully CW,
210 volts or less.