Page 22
Warning! Safety instructions • Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture. •...
Page 23
• Only use an authorized AC adapter and power cord approved by a danger of combustion/explosion or fire due to careless handling of LG Electronics. Otherwise, this may result in fire, electric shock, the inflammable substances. malfunction or product deformation.
Page 24
• Signal from Remote Control can be interrupted due to external/ • As long as this unit is connected to the AC wall outlet, it is not internal lighting eg Sunlight, fluorescent lighting. If this occurs turn disconnected from the AC power source even if you turn off this unit off lighting or darken viewing area.
Preparing • When supported cable is not long enough to connect TV set with Companion Box (AV Box), you can use an extension cable. • If the TV is turned on for the first time after it was shipped from the •...
Lifting and moving the TV Using the button Please note the following advice to prevent the TV from being scratched You can simply operate the TV functions, using the button. or damaged and for safe transportation regardless of its type and size. •...
Mounting on a wall Wall Material Tools Wall Width Concrete Wall mounting If you are attaching the TV to other building materials, please contact anchor, Wall Brick qualified personnel to install the wall mount. mounting screw, 70 mm Natural stone Ø...
How to attach to masonry walls Please follow the below direction. 1 Use a drill bit Ø 8 mm to drill a hole for the anchor location within a depth of 80 mm to 100 mm. Wall mount Stud • When installing the product on wall material not designated, install 2 Clean the drilled hole.
• Make sure that children do not climb on or hang on • If the cable that connects the panel to the Companion the TV. Box (AV Box) is to be embedded in the wall, it is recommended to make use of a conduit as shown •...
Connections (notifications) Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). Connect various external devices to the TV and switch input modes to • Use a signal splitter to use more than 2 TVs. select an external device.
Speaker output setup Network setup Wired network connection This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication. Connect the LAN port of the Modem or Router from Pro:Centric server to the LAN port on the TV.
Other connections Magic remote functions Connect your TV to external devices. For the best picture and audio When the message “Magic remote battery is low. Change the battery.” is quality, connect the external device and the TV with the HDMI cable. displayed, replace the battery.
Supported licenses may differ by model. For more information about the pointer is in use, the pointer will disappear from the screen and licenses, visit www.lg.com. Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right.
This phenomenon also occurs in third-party products and is not LG Electronics will also provide open source code to you on CD-ROM subject to exchange or refund. for a charge covering the cost of performing such distribution (such •...
Specifications Wireless module specifications • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. • For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % (Depending on country) Digital TV Analogue TV...
Page 37
HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported. Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode (Depending on model) Frequency (kHz) Frequency (Hz) 31.469 59.94 Horizontal Vertical 640 x 480 Resolution Frequency (kHz) Frequency (Hz) 31.5 60.00...
Photo format Video codec File Extension Codec Format Resolution Format VC-1 Advanced Profile (except for Minimum: 64 (W) x 64 (H) Video WMVA), VC-1 Simple and Main Profiles .asf Maximum (Normal Type): .jpeg, .jpg, .wmv WMA Standard (except for WMA v1/ JPEG 15,360 (W) x 8,640 (H) Audio...
Page 39
IR CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button (INPUT) Remote control Button Remote control Button Number Key 0-9 Remote control Button 10-19 Alphabet buttons...
EXTERNAL CONTROL DEVICE Phone jack Type (TV) (PC) SETUP (Depending on model) • You need to purchase the phone-jack to RS-232C cable required RS-232C IN (CONTROL & SERVICE) (PC) (TV) for the connection between the PC and the TV, which is specified in the manual.
RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations (Standard RS-232C cable) DATA COMMAND1 COMMAND2 (Hexadecimal) 01. Power 00 to 01 02. Aspect Ratio (See p. 22) 03. Screen Mute (See p. 23) 04. Volume 00 to 01 Mute 05.
Transmission / Receiving Protocol 01 Power (Command: k a) ►To control Power On/Off of the set. (Depending on Model) Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Power Off 01 : Power On [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [a][ ][Set ID][ ][OK/NG][Data][x] [Command 2] : Second command to control the TV.
Page 43
03 Screen Mute (Command: k d) 06 Contrast (Command: k g) ►To select screen mute on/off. ►To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission Transmission [k][d][ ][Set ID][ ][Data][Cr] [k][g][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Data Min : 00 to Max : 64 Video mute off * Refer to Real data mapping...
Page 44
09 Tint (Command: k j) 12 Remote Control Lock Mode (Command: k m) ►To adjust the screen tint. ►To lock the front panel controls on the monitor and remote control. You can also adjust tint in the PICTURE menu. Transmission Transmission [k][m][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr]...
Page 45
15 Energy Saving (Command: j q) 17 Equalize (Command : j v) ►To reduce the power consumption of the TV. You can also adjust ►To adjust equalize. Energy Saving in PICTURE menu. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Power Saving Level Function...
Channel data range 22 Input select (Command: x b) (Main Picture Input) Min : 00 Max : 270F (0 to 9999) ►To select input source for main picture. Transmission [a][ ][Set ID][ ][OK/NG][Data][x] [x][b][ ][Set ID][ ][Data][Cr] Data Structure 19 Programme Add/Skip (Command: m b) ►To set skip status for the current Programme.
Page 47
* Real data mapping 00 : Step 0 Step 10 (Set ID 10) Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE :...
Page 48
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...