Program 14 : Trunk, Basic Setup; 14-01: Basic Trunk Data Setup - NEC Univerge SV8100 Programming Manual

Level:
IN
Description
Use Program 14-01: Basic Trunk Data Setup to set the basic options for
each trunk port. Refer to the chart below for a description of each option, its
range and default setting.
Input Data
Item
No.
01
02
03
04
Programming Manual

Program 14 : Trunk, Basic Setup

14-01: Basic Trunk Data Setup

Trunk Port Number
Item
Trunk Name
Set the names for trunks.
The trunk name displays on
a multiline terminal for
incoming and outgoing calls.
Transmit Level
Use this option to select the
CODEC gain for the trunk.
The option sets the gain
(signal amplification) for the
trunk you are programming.
Receive Level
Use this option to select the
CODEC gain for the trunk.
The option sets the gain
(signal amplification) for the
trunk you are programming.
Transmit Gain Level for
Conference and Transfer
Calls
Use this option to select the
CODEC gain type used by
the trunk when it is part of an
Unsupervised Conference.
001~200
Input Data Default
Up to 12 Characters Refer to
below chart
1~63 32 (0dB)
(-15.5dB~
+15.5dB in 0.5dB
intervals)
1~63 32 (0dB)
(-15.5dB ~ +15.5dB
in 0.5dB intervals)
1~63 32 (0dB)
(-15.5dB ~ +15.5dB
in 0.5dB intervals)
Program
14
Related
Program
2 - 149