Supported Display Modes - Toshiba dynadock 4K User Manual

30
Using the dynadock 4K Docking Station and
Adjusting Settings
To configure the dynadock 4K docking station's video output
signal to Mirror mode or Extended mode, connect an
external display to the dynadock 4K docking station as
described in the section
on page
1 Click the
tray/notification area of your Windows
2 Select
NOTE
NOTE
NOTE
NOTE

Supported display modes

Two components make up the display mode: Resolution and
Refresh rate. These components are defined as follows:
❖
Resolution:
screen horizontally and vertically.
❖
Refresh rate:
re-scanned. Higher frequencies reduce flicker.
21, and then follow the steps below:
dynadock 4K
or
Extend
If the icon is not visible in your system tray/notification
area, make sure the dynadock 4K docking station is
connected and docked, and then click the
Hidden Icons
hidden icons.
If you notice certain windows or other parts of your
display are missing when you disconnect your computer
from the dynadock 4K docking station, you may need to
de-select the Extend desktop onto this display
checkbox in your Windows
the entire image to your primary screen.
You can also use the Windows
switch between Extended mode and Mirror mode.
The external displays connected to the dynadock 4K
docking station may be identified as "2", "3", or "4" on
®
the Windows Display settings (depending on your
computer model), even though there may not be four
viewable displays.
The number of pixels displayed on the
The speed at which the entire screen is
"Connecting your external displays"
( ) icon in the system
from the menu.
Mirror
( ) button, if necessary, to display
®
Display settings to return
®
®
desktop.
Show
Display settings to