7.
Click the "Variable unset error" cell on the "Packet Setting" screen
8.
Enter 'W0' to "Send Data Storage Area" on the "Element Setting" screen.
9.
Set the packet settings in the "Variable Unset" cell of "Packet Setting" on the "Protocol Setting" screen with the same
procedure (from step 5 to step 8).
Set the following values for the data storage area.
Packet name
NOR/0601H:RD Controller Status
ERR/0601H; RD Controller Status
ERR: Command Finished Abnormally
10.
Select [Online] [Write to Module] from Engineering tool.
11.
Select "CPU Built-in Memory" in "Target Memory" on the "Write to Module" screen, and click the [Execute] button.
APPENDICES APPENDIX
556
Appendix 7 When Connecting the Module to a Remote Head Module
Element number
2
8
9
2
7
2
4
Element name
Communication Unit No.
Operation Status
Related Information
Communication Unit No.
Response Code
Communication Unit No.
End Code
Data storage area
specification
Set 'W1000'
Set 'W1001'
Set 'W1002'
Set 'W1000'
Set 'W1003'
Set 'W1000'
Set 'W1004'