Canon imagePRESS C800 Series Technical Workbook page 20

T E C H N I C A L W O R K B O O K
6) Connect the Halogen Heater at the two (2) locations. Use care not to insert the Halogen Heater twisted while
connecting it.

NOTE:
• Use care not to damage the Pressure Belt during mounting.
• After replacement of the Pressure Belt Unit, Apply Grease (SE1107) respectively to the six
(6) Gears [1] on the Fixing Belt Unit and the Gear [2] of the Fixing Drive Assembly.
Amount to apply: about five (5) grains of rice per Gear (approximately 100 mg).
Area of application: entire circumference of the Gear [A] and Teeth surface.
[A]
[1]
14
[A]