Dab Display Modes - Hitachi KH330E Instruction Manual

DAB Display Modes

Every time you press the DISPLAY button, the display will cycle through the following
Signal Strength
display modes: Ensemble Name, , Time / Date, Programme Type,
Sleep Timer Status
Audio Type / Bitrate, DLS, Channel no. / Frequency,
.
The information is displayed on the lower segment of the display.
Ensemble Name
GB
Ensemble Name
A ensemble is a collection of radio stations that
are bundled and transmitted on one frequency.
There are national and local ensemble. Local
ones contains stations that are specific to that
area.
Signal Strength
Signal Strength
The display will show a slide bar to indicate
the signal strength, the stronger the signal, the
longer the bar will be from left to right.
Time / Date
Time / Date
The broadcaster (Radio station) provides clock
and date information automatically so there's
no need to manually set this information. In the
unlikely event that the broadcaster does not
Programme Type
transmit any clock information, the display will
show the incorrect time and date.
Programme Type
This describes the "Style" or "genre" of music
that is being broadcast e.g. "Rock" or "Classical".
Audio Type / Bitrate
If programme type information is not available,
the display will show <Prg Type N/A>.
Audio Type / Bitrate
The display will show the audio mode (Stereo
DLS
or Mono) and the digital audio bit rate being
received.
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message
Channel no. / Frequency
that the broadcaster may include with their
transmissions. The message usually includes
information, such as program details etc.
Channel no. / Frequency
The Channel no. and frequency of the
Sleep Timer Status
present station will be displayed, such as
"11C 220.352MHz".
17