3D-12 FRONT SUSPENSION
: Tightening Torque
: Do not reuse
1
WHEEL HUB AND STEERING KNUCKLE
4
6
REMOVAL
1) Hoist vehicle and remove wheel.
2) Uncaulk drive shaft nut (1).
3) Depress foot brake pedal and hold it there. Remove drive shaft
4) Remove caliper carrier bolts.
5) Remove caliper (1) with carrier.
NOTE:
Hang removed caliper with a wire hook or the like so as to
2
prevent brake hose from bending and twisting excessively
or being pulled.
Don't operate brake pedal with pads removed.
6) Pull brake disc (2) off by using two 8 mm bolts.
7) Pull out wheel hub (1) with special tools.
3
2
5
1
nut (1).
CAUTION:
Never reuse drive shaft nut (1).
Special Tool
(A): 09943-17912
(B): 09942-15510
1. Front wheel hub
2. Circlip
3. Wheel bearing
4. Steering knuckle
5. Drive shaft nut
: Calk, after tightening.
6. Hub bolt
175 N·m (17.5 kg-m)