Recalling A Stored Station; Fm Display Modes - Hitachi AXM1204E Instruction Manual

Recalling a Stored Station

1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
(tapping) MEMORY.
2. Press (tap) to select your desired preset station number.
3. Press SELECT/MOnO/ST. on the remote control to confirm the selection.
• The stored stations will be saved into the memory and power off will not erase it. Storing a
new station into a preset location will erase the previously stored station in that location.
• While the unit is in Standby mode, press and hold (tap and hold)
preset memory.

FM Display Modes

/ MEnU on the unit or press
Tap
will switch through the following display modes.
The information of each display mode is displayed on the lower segment of the LCD display.
Radio Text
This is a scrolling message displaying information
about the current programme.
Station Name
This displays the station name.
Programme Type
This describes the "style" or "genre" of the
programme that is being broadcast.
Frequency
This shows the frequency of the current station.
Audio Type
This displays if the station being received is in mono
or stereo.
Time
This displays the current time provided automatically
by the broadcaster.
Date
This displays the current date provided automatically
by the broadcaster.
/ MEnU/inFO on the remote control, the LCD display
/ MEnU to erase all the
Radio Text
Station name
Programme Type
Frequency
Audio Type
Time
Date
GB
25