General Operation
Powering On/OFF
When you first connect the unit to the mains socket, switch On/OFF at the rear of the unit
to the On position. The unit will scan for the current time then go to STAnDBY mode.
•
Tap
GB
•
Tap
to STAnDBY mode. The
To switch the unit off completely, switch On/OFF to the OFF position or unplug the
•
mains plug from the mains socket.
Selecting Modes
Press(tap) MODE repeatedly to switch between DAB, FM, CD, USB, CARD, BT LinK and
AUX modes.
• When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
• During STAnDBY mode, press any buttons to light up the display for 10 seconds.
• Please turn the unit off completely to save energy when not in use.
Adjusting the Volume
Turn the VOLUME +/– dial on the unit or press VOLUME +/– on the remote control to
•
adjust the volume.
•
If you wish to turn the sound off, press MUTE on the remote control. Press MUTE again
or press VOLUME +/– on the remote control or turn VOLUME +/– to resume normal
listening.
Setting the Time and Date
1. While in DAB or FM mode, press and hold (tap and hold)
menu.
2. Press (tap)
3. Press (tap)
4. Press (tap) the
Set Time/date
Auto update
Set 12/24 hour
format
Set date format
18
on the unit or press the button on the remote control to switch the unit on.
on the unit or press the button on the remote control to switch the unit back
icon will illuminate red.
to select <System>, and then press SELECT/MOnO/ST. to select.
to select <Time>, and then press SELECT/MOnO/ST. to select.
buttons to select the option below:
Press(tap)
SELECT/MOnO/ST. to confirm.
Press(tap)
Any or No update, then press SELECT/MOnO/ST. to confirm.
Press(tap)
MOnO/ST. to confirm.
Press(tap)
press SELECT/MOnO/ST. to confirm.
/ MEnU to display the
to adjust the time and date, then press
to select Update from DAB, FM, Update from
to select 24 or 12 hour, then press SELECT/
to select MM-DD-YYYY or DD-MM-YYYY, then