Samsung iDCS 500 Technical Manual page 123

iDCS 500 Release 2 / OfficeServ
TECHNICAL MANUAL
• Place the keyset face down on a flat surface.
• Remove the base pedestal by placing your thumbs over the attachment clips and press
outward while simultaneously pressing down on the keyset body with your fingertips.
• Remove the two knockouts from the bottom of the keyset.
• Plug in the daughter module and secure with the two screws provided.
ADDING AN iDCS KEYSET
DAUGHTERBOARD MODULE
REMOVE
KNOCKOUTS
FIGURE 8–1
Home Page Table of Contents
INSTALLATION
PART 8 MARCH 2004
SECURING
SCREWS