Samsung iDCS 500 Technical Manual page 110

iDCS 500 Release 2 / OfficeServ
TECHNICAL MANUAL
PART 7. CONNECTING OPTIONAL EQUIPMENT
7.1 MUSIC ON HOLD/BACKGROUND MUSIC
Connect each customer-provided music source to the music input on a MISC daughter
board (see figure 7–1)
In accordance with US copyright law, a license may be required from the American
Society of Composers, Authors and Publishers (ASCAP) or another similar
organization if copyrighted music is transmitted through the Music on Hold feature.
Samsung Telecommunications America hereby disclaims any liability arising out of
failure to obtain such a license.
Each C.O. line (trunk) can be programmed to receive a music source, system-
generated tone or NO MUSIC when it is put on hold.
receive a music source or NO MUSIC for background music.
Section for instructions (MMC 308).
7.2 EXTERNAL PAGING
Each MISC daughter board provides a voice pair and a two dry contact pairs to be
used with customer-provided paging equipment. Connect the customer-provided
paging equipment to the page output pins of a MISC daughter board
There can be up to 3 MISC boards in the system. Only one per cabinet. In a 3 cabinet
system there can be 3 separate page outputs and 6 dry contact pairs for the four
external page zones.
The Page Zone Relay ports assigned to each dry contact pair are listed in the following
table. Assign the DN number to the selected page zone using Default DN (Ports).
MISC BOARD CABINET #
1
1
1
2
2
2
3
3
3
IMPORTANT NOTICE
HARDWARE
ITEM
1 Page Tip & Ring
1 Contact 1
1 Contact Pair 2
2 Page Tip & Ring
2 Contact Pair 1
2 Contact Pair 2
3 Page Tip & Ring
3 Contact Pair 1
3 Contact Pair 2
7.1
Home Page
INSTALLATION
PART 7 MARCH 2004
See MMC 408. Each keyset can
See the Programming
(see Figure 7–2).
MISC DEFAULT
FUNCTION # DN (Ports)
03
06
07
03
06
07
03
06
07
Table of Contents
361
362
363
364
360
366
367
368
369