Philips InnoSpire Go Manual page 7

If you need to take a rest, press the on/off button to stop your treatment. To continue your
13
treatment press the on/off button again.
Your treatment is finished when the nebulizer beeps and the LED flashes. The device will
14
turn off automatically.
Check the medication chamber for residual medication. If there are more than a few drops
15
remaining, press the on/off button again to continue your treatment.
Clean the nebulizer following the cleaning instructions.
16
Charging the battery
Connect the power adapter to the socket on the back
of the handset.
Plug the other end of the power adapter into the
wall outlet.
The LED will PULSE GREEN.
Charge the battery until the LED turns SOLID GREEN
indicating it is fully charged.
Unplug the power adapter from both the handset and
the wall outlet. It is recommended to unplug the power
adapter once the battery is fully charged to preserve
battery life.
Cleaning and maintenance
Cautions
• Do not autoclave the mouthpiece assembly or handset.
• Do not put any part of the device in a microwave or conventional oven.
• Do not immerse the handset in liquid or steam clean.
• Never poke or clean the mesh with any sharp objects as this will damage the mesh.
• Do not clean the device when in use.
• Disconnect device from power supply prior to cleaning.
1128271R02_InnoSpireGo_Euro2_Spreads_IFU_10B_FINAL.indd 7
ENGLISH
7
11/8/17 5:07 PM