GE eBike Service Manual page 64

PC: Select the serial COM port and confirm with "OK".
Then activate the update with "Go".
When the communication link has been established, a blue
progress indicator indicates the file transfer. The modules IFP,
AZP, MRD, NIB, MED will be transferred sequentially. Depending
on the PC performance, the transfer may take a few seconds
up to approx. 1 minute.
eBike: Note: When the AZP download starts, the
eBike: Note: During the AZP download, the message
eBike: Note: After completion of all modules IFP, AZP,
PC: Once the update has been completed, the message
"Download success !!! Close Application !" will appear.
Confirm the message with "Yes".
- 58 -
D: Service Menu
beeper may sound for some time.
"AZP BOOTL. V2.1" is displayed.
After completion of the AZP download, the
message "AZP READY !" is displayed during
the remaining update process.
MRD, NIBP the message "Software Update
is running - wait approx. 15 sec" is
displayed.
Don't switch off the ergometer.
eBike, eBike L, eBike EL 2018112-003 Rev J