Transmit Optical Output; Normal Laser Operation; Location Class; Environmental Requirements - Nokia 7368 Product Manual

ETSI ONT safety guidelines
3.5.3
The maximum transmit optical output of an ONT is +5 dBm.
3.5.4
In normal operation, fiber cable laser radiation is always off until it receives signal
from the line terminal card.
Eyes can be damaged when they exposed to a laser beam. Operating personnel
must observe the instructions on the laser explanatory label before plugging in the
optical module.
3.5.5
Use cable supports and guides to protect the receptacles from strain.

3.6 Environmental requirements

See the ONT technical specification documentation for more information about
temperature ranges.
During operation in the supported temperature range, condensation inside the ONT
caused by humidity is not an issue. To avoid condensation caused by rapid changes
in temperature and humidity, Nokia recommends:
•
•
•
30

Transmit optical output

Normal laser operation

Risk of eye damage by laser radiation.
Danger —

Location class

The door of the ONT not be opened until temperature inside and outside the
enclosure has stabilized.
If the door of the ONT must be opened after a rapid change in temperature or
humidity, use a dry cloth to wipe down the metal interior to prevent the risk of
condensation.
When high humidity is present, installation of a cover or tent over the ONT helps
prevent condensation when the door is opened.
3FE-48009-AAAA-TCZZA
7368 ISAM ONT G-240W-J Product Guide
Issue: 01