Fcc Statement; Fcc Radiation Exposure Statement - Nokia 7368 Product Manual

7368 ISAM ONT G-240W-J Product Guide
The G-240W-J devices qualify as high network availability (HiNA) equipment. Since
For information about the type and number of network ports, see
For information about power consumption, see
2.2.3
This equipment has been tested and found to comply with the limits for a Class B
•
•
•
•
2.2.4
This device complies with FCC radiation exposure limits set forth for an uncontrolled
Issue: 01
together with Commission Regulation (EC) No 1275/2008 and Commission
Regulation (EC) No 801/2013.
the main purpose of G-240W-J devices is to provide network functionality with HiNA
7 days/24 hours, the modes Off/Standby, Power Management, and Networked
Standby are inappropriate.
interfaces and interface capacity"
in chapter 5.

FCC statement

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

environment and it also complies with Part 15 of the FCC RF Rules. This equipment
must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 23 cm from all persons and must not be co-located or operating
3FE-48009-AAAA-TCZZA
in chapter 5.
"G-240W-J detailed specifications"
ANSI CPE safety guidelines
"G-240W-J
19