Net; Wan - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual

Net

In this menu you can configure basic parameters of the local area network of the access point and
configure connection to the Internet (a WAN connection).

WAN

On the Net / WAN page, you can create and edit connections used by the access point.
By default, the WAN connection is configured in the system. It is assigned to the WAN port of the
access point. You can edit this connection or delete it.
To create a new connection, click the Add button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the Apply button.
To remove a connection, select the checkbox located to the left of the relevant line in the table and
click the Delete button. Also you can remove a connection on the editing page.
To use one of existing WAN connections as a default gateway, select the choice of the Default
gateway radio button located in the line corresponding to this connection.
Figure 57. The Net / WAN page.
Page 70 of 158
Configuring Device