DAP-1155 Wireless N150 Access Point & Router
User Manual
PPTP + Dynamic IP or L2TP + Dynamic IP Connection
If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server
addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page (for a detailed description of all the connection's
parameters, see the Creating PPTP/L2TP + Static IP or PPTP/L2TP + Dynamic IP WAN
Connection section, page 85).
Click the Next button to continue.
Figure 36. Configuring PPTP + Dynamic IP WAN connection.
Page 48 of 158
Configuring Device