Navigating The Device Screens; Menu Navigation (With Therapy On) And Optional Humidification Settings - Philips Respironics E30 User Manual

Philips Respironics E30 User Manual
Note
During therapy, if there is a mains interruption (i.e., power loss), therapy will resume once power is
restored if power loss is shorter than 10 minutes. If power loss is greater than 10 minutes, the device will
return to the Home screen once power is restored. From there, you may resume therapy as needed.
3.8

Navigating the device screens

The User Interface (UI) on this device allows you to adjust the device settings and view information about
your therapy. The UI is composed of the display screen and the control dial. Rotate the control dial in either
direction to scroll through the menus on the display screen. Press the control dial to open a menu.
To adjust a setting:
1. Rotate the control dial to your desired setting.
2. Press the control dial to select that setting.
3. Rotate the control dial to change the setting. The rotate dial icon
dial to perform an action.
4. Press the control dial again to save the setting change. The click dial icon
press the dial to perform an action.
Notes
Pressing the dial when the down arrow
more menu options. Pressing the dial when the up arrow
back to the main menu.
The screens shown throughout this guide are examples for reference only. Actual screens may vary
based upon device model and provider settings.
3.9 Menu navigation (with therapy on) and optional
humidification settings
The following screen is displayed while therapy is turned on. The table below describes the different
features that may appear on your screen. If an accessory is attached to the therapy device, additional
symbols may appear. Refer to the instructions provided with the accessory for more information.
20 Device setup
appears on any screen will take you to a sub-menu with
appears on any sub-menu will return you
on any screen indicates to rotate the
on any screen indicates to