Table of Contents
Advertisement
7.6
Links
The DALI participants created via the allocation function can now be linked with sensors.
The link is made via the device function of the Web-based user interface of the
System Access Point.
7.6.1
Linking actuator and sensor
Fig. 16:
Linking actuator and sensor
1. To connect an actuator with a sensor, first click on the desired sensor [1], which is to
operate the actuator, and then on the actuator [2].
2. Press the tick at the bottom right to take over the entry.
–
A blue connecting line indicates the link between the two devices. The configuration is
now transmitted automatically to the devices. The transmission can (depending on the
number of affected devices) take a number of seconds. During the transmission a
progress bar is displayed around the devices affected.
Product manual 9AKK107680A3585
Commissioning
│29
Advertisement
Table of Contents
