Removing Fasteners From The Packing Case - Huawei RP100 Commissioning Manual

HUAWEI RP100&RP200 Room Presence
Commissioning Guide

3.2.1 Removing Fasteners from the Packing Case

Before unpacking the cartons, clean up the installation site to protect the devices from being
scratched.
Step 1 Remove the packing straps using diagonal pliers or scissors.
Step 2 Take off the carton cover.
Step 3 Remove the three screws from the carton using a Phillips screwdriver, as shown in
3-4.
Figure 3-4 Carton
Step 4 Unpack the carton. Then, use an H6 Allen wrench to remove the four M8 hex socket screws
from the top of the fasteners on the left and right of the packing case, as shown in
Issue 01 (2015-02-12)
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Figure
Figure 3-5.
17