To Set Illumination Pattern For Call Indicator Lamp; To Enable/Disable Rtp Alarm - NEC DT930 Series User Manual

1.
Frequency (Hz)
No. Menu Item
1st
13 Tone Type 13
14 Tone Type 14
15 Download 1
16 Download 2
17 Download 3
Note: There are three pre-installed melodies on the DT900
telephones. They include: Download 1: C major ringtone,
Download 2: Canon and Download 3: Turkish March.
These pre-installed melodies are overwritten when you
download a new ringtone.
Note: When selecting Automatic or not performing this
ringer tone setting, Tone Type 1 is automatically applied.
Note: When selecting Automatic, the preview function will
not operate. Also, when selecting Download 1/2/3, the ringer
tone file must be downloaded in advance. If there is no
downloaded file, you hear no tone.
Note: Tone Type 1 to Tone Type 8:
In the preview function, each ringer tone sounds
continuously. Actual ringer pattern of each tone is
determined by the initial system settings.
Note: Terminal settings may not become effective,
according to the system settings. For details, contact the
System Administrator.
TIP
The enabled item is highlighted.
You can set the ringer tone for the telephone here.
Ringer Tone type can be set for Name, Group and
TIP
Telephone set. The ringer Tone type set for Name
has higher priority than the types set for Group and
Terminal set.
Remarks
2nd
– Melody 4
– Melody 5
C Major Ring Tone
–
(See note below.)
Canon
–
(See note below.)
Turkish March
–
(See note below.)
To Set Illumination Pattern for Call Indicator
Lamp
The procedure below shows how to set the illumination
pattern (color of Call Indicator Lamp).
(1) Display the Menu screen, select Settings.
1
User Settings.
(2) Select
1
Incoming Call.
(3) Select
4
Illumination.
(4) Select
1
External Call or
(5) Select
(6) Select a desired illumination pattern.

To Enable/Disable RTP Alarm

The procedure below shows how to enable/disable
RTP alarm. The RTP Alarm allows the terminal user to
be notified that the voice packet was not received in a
certain period of time because of network delay etc.
(1) Display the Menu screen, select Settings.
1
User Settings.
(2) Select
2
Talk.
(3) Select
1
RTP Alarm.
(4) Select
0
Automatic,
(5) Select
(see the following table).
Menu Items
Follow the system settings. If no setting is
0 Automatic made in the system, the default setting
(Alarm=ON) is applied.
1 Disable Follow the terminal settings (OFF).
2 Enable Follow the terminal settings (ON).
92
2
Internal Call.
1 2
Disable or Enable
Description