Set Ringer Tone - NEC DT930 Series User Manual

1.
Music Ring 1, 2 and 3 have been installed at
the factory with firmware 2.1.0.0 or later.
When using a ring tone music source other
than Music Ring 1, 2 or 3, you must download
the music file.
For the procedure to download a ringer tone
file, refer to "To Download a

Set Ringer Tone

The procedure below shows how to change the ringer
tone for internal call and external call.
(1) Display the Menu screen, select Settings.
1
User Settings.
(2) Select
Select an item by one of the following operations.
❍
Highlight an item by using
or OK.
1
❍
Press .
1
Incoming Call.
(3) Select
Select an item by one of the following operations.
❍
Highlight an item by using
or OK.
1
❍
Press .
3
Ring Tone.
(4) Select
Select an item by one of the following operations.
❍
Highlight an item by using
or OK.
❍ 3
Press .
File".
, and press ,
, and press ,
, and press ,
91
1
External Call when setting the ringer
(5) Select
tone for external calls. Select
when setting the ringer tone for internal calls.
Select an item by one of the following operations.
❍
Highlight an item by using
or OK.
❍ 1 2
Press or
(6) Select a desired tone type. You can preview
designated ringer tone.
Select an item by one of the following operations.
❍
Highlight an item by using
OK.
❍
Press the digit key of desired number, and press
or OK.
For example, press
Download 1.
Frequency (Hz)
No. Menu Item
1st
0 Automatic 520
1 Tone Type 1 520
2 Tone Type 2 520
3 Tone Type 3 1400
4 Tone Type 4
5 Tone Type 5
6 Tone Type 6 1100
7 Tone Type 7 660
8 Tone Type 8
9 Tone Type 9
10 Tone Type 10
11 Tone Type 11
12 Tone Type 12
2
Internal Call
, and press
.
, and press
1 5 15
+ to select
Remarks
2nd
660 16Hz modulation
660 16Hz modulation
660 8Hz modulation
1100 Door Phone
1100 No modulation
540 No modulation
1400 16Hz modulation
760 16Hz modulation
1100 Envelope
– Door Phone Melody
– Melody 1
– Melody 2
– Melody 3
,
or