Philips 9000 Series Manual page 12

12
English
2 Put the supply unit in the wall socket.
3 Press to open the SmartClean system cap, to be able to place the
shaver in the holder ('click') (Fig. 16).
4 Hold the shaver upside down above the holder. Make sure the
front of the shaver points towards the SmartClean system holder
(Fig. 17).
5 Place the shaver in the holder, tilt the shaver backwards and press
down the SmartClean system cap to connect the shaver ('click')
(Fig. 18).
Note: The battery symbol starts to flash to indicate that the appliance
is charging. When the battery is fully charged, the battery symbol
lights up continuously.
Using the appliance
Note: This appliance can only be used without cord.
Switching the appliance on and off
- To switch on the appliance, press the on/off button once (Fig. 19).
The display lights up for a few seconds.
- To switch off the appliance, press the on/off button once.
The display lights up for a few seconds and shows the remaining
battery charge.
Shaving
Skin adaptation period
Your first shaves may not bring you the result you expect and your
skin may even become slightly irritated. This is normal. Your skin and
beard need time to adapt to any new shaving system. To allow your
skin to adapt to this new appliance, we advise you to shave regularly
(at least 3 times a week) and exclusively with this appliance for a
period of 3 weeks.
Shaving tips
- Select your personal comfort settings (see 'The display').
- For the best results on skin comfort, pre-trim your beard if you
have not shaved for 3 days or longer.