Adjusting The Luminance Key/Linear Key - Panasonic Live Production Suite Series Operating Manual

r Wipe pattern screens for key transition
Setting the Multi Pattern effect
The wipe pattern can be divided to the specified number.
f Enabled when the following pattern waveform is selected.
- WIPE
1
Select the <ME1>/<ME2> button → [KEY1], [KEY2] → [Key Setting] tab.
2
Set the specification method of the number of division in [H/V Sync] of the [Multi] column.
[ON]
[OFF]
3
Set the number of division in horizontal and vertical direction in [H] and [V] of the [Multi] column.
Setting the Modulation effect
An effect to ripple the wipe edge can be added.
f Enabled when the following pattern waveforms are selected.
- WIPE
- SQ: 42, 43, 44, 45
1
Select the <ME1>/<ME2> button → [KEY1], [KEY2] → [Key Setting] tab.
2
Select [H Modulation] and [V Modulation] in the R menu, and set [Amplitude], [Frequency], and [Speed] in the encoder menu.
[Amplitude]
[Frequency]
[Speed]
3
Select an item in [H Pattern], [V Pattern] in the [Modulation] column.
[Sine]
[Delta]

Adjusting the luminance key/linear key

Adjust the luminance key and linear key definition.
1
Select the <ME1>/<ME2> button → [KEY1], [KEY2] → [Key Setting] tab.
2
Select [Key Adjust] in the R menu, and set [Clip], [Gain], and [Density] in the encoder menu.
[Clip]
[Gain]
[Density]
3
Select an item in [Key Invert].
[OFF]
[ON]
Chapter 5 Basic Operations — KEY
Makes the number of division the same in horizontal and vertical directions.
Different number of division can be specified for horizontal and vertical directions.
Sets the amplitude of the wave.
Sets the frequency of the wave.
Sets the speed of the wave movement.
Selects sine waves.
Selects delta wave.
Sets the reference level for creating key signals.
Sets the key amplitude.
Sets the key density.
Does not invert the key signals generated internally.
Inverts the key signals generated internally.
– 61 –