Service Overview; Cleaning The Air Filter - Sony MAV-2000 Installation Manual

Multi access video and audio server, input and output processor board

Hide thumbs Also See for MAV-2000:

Table of Contents

A filter is fitted on the rear side of the front panel assembly

of the unit. If accumulated dust on the filter impedes the

flow of air, the inside may heat up and troubles may occur.

Clean the filter periodically.

MAV-2000

Section 2

Service Overview

Cleaning

1. Turn off the main power of the MAV-2000.

2. Fully loosen the three screws (with drop-safe).

3. Open the front panel assembly in the direction of the

arrow.

4. Press the stopper in the direction of the arrow to lock

the front panel.

5. Remove the filter (A) and filter (B).

6. Remove the dust from the filter using a vacuum.

7. Attach the filter in reverse order of the disassembly

procedure.

8. Unlcok the stopper and close the front panel.

RK4 x 16

Filter (B)

Stopper

Filter (A)

2-1 (E)

Table of Contents

Bkma-2010