Installing the Connecting Links
Note: The connecting links are part of the optional tow pole
kit.
1. Align the connecting link to the last link in 1 end of the
safety chain (D of
Figure
2. Insert the connecting link through the chain link until
the connecting link snaps closed.
3. Repeat steps
1
and
in the other end of the safety chain.
4
Adjusting the Mixing Paddles
No Parts Required
Procedure
If the mixing paddles and wipers need adjustment, adjust the
paddles and wipers; refer to
5).
2
to install the other connecting link
Adjusting the Paddles (page
Product Overview
1. Rear cowl
31).
2. Front cowl
3. Grate
4. Bag splitter
5. Dump handle
6. Grate lift arm
Controls
Become familiar with all the controls before you start the
motor and operate the machine.
Clutch Lever
The clutch lever is used to engage and disengage motor
power to the paddles.
9
Figure 6
Right side
7. Clutch lever
13. Chute
8. Drum latch
14. Axle
9. Front post
15. Wheel
assembly
10. Tow pole
16. Cowl latch
11. Safety-chain
keyhole
12. Drum