DUPLICATING A VIDEO TAPE
If you connect the TV/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make
all connections before turning on the power.
1
Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
CONNECTION TO ANOTHER VCR
Playback VCR
To VIDEO
To AUDIO
OUT
OUT
Audio/Video cable (not supplied)
3
Press both REC at the same
time on the remote control of
the TV/VCR.
REC
•
NOTES:
It is recommended that the tape speed be set to the SP mode on the TV/VCR for best result.
•
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials
may infringe the rights of copyright owners and be contrary to copyright laws.
48
5L80101C P44-BACK
2
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer's instructions. A typical
Recording TV/VCR
camcorder dubbing hookup is shown below.
Playback Camcorder
To Video In
To Audio In
4
Press PLAY on the playback
VCR or Camcorder.
PLAY
48
Press INPUT SELECT to select AUDIO/
VIDEO input position. "LINE" will appear on
the screen.
INPUT
SELECT
To AV jack
To Video/Audio In
Audio/Video cable (not supplied)
5
Press STOP after duplicating
a video tape.
STOP
20/4/04, 16:23
LINE
Recording TV/VCR