Starting Setup - Toshiba MV13P2 Owner's Manual

STARTING SETUP

The STARTING SETUP function makes installing your TV/VCR easily. It leads you the Language selection,
TV/CABLE selection, auto channel memory and auto clock setting automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection is made!
Press POWER.
1
The starting setup function begins and the
Language setup menu appears on the screen.
Press or to select your desired language,
then press ENTER.
ENTER
1 3
2
3
Press or to select "START", then press
ENTER.
If you select "CANCEL" and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
ENTER
NOTES: • The starting setup function will work only when you press the POWER button for the first time.
• The auto clock function uses the EDS (Extended Data Service) information carried on the channel signal.
If the antenna signal is weak or there are no channels with EDS informations, the auto clock function may
not set the time. In this case you must set the clock manually (see page 17).
• In "AUTO CLOCK" setting, it may take more than 10 minutes to read the EDS signal for one
channel, which has only "Time of day" or "Local time zone".
5L80101C P10-19
2
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
< >
/ / ENTER
4
13
Press or to select "TV" or "CABLE",
then press ENTER.
ENTER
Now the "AUTO CH MEMORY" starts.
After it completed the "AUTO CLOCK" starts
automatically. After the starting setup is com-
pleted, the TV channel appears on the screen.
A
AUTO CH MEMORY
STOP : CANCEL
20/4/04, 16:19
CHANNEL PLAN
TV
CABLE
< >
/ / ENTER
1
CANCEL
AUTO CLOCK
STOP : CANCEL
13