Toshiba Strata CT User Manual page 19

Features
Remote Call Forward—External Destination Change
If Call Forward-External mode is set at your station, you can change the forwarding destination from
a telephone outside of the system.
The destination is normally an external Public Telephone Network Number, but it can also be an
internal Directory Number.
To change the destination number
1. Call into the Strata CT
system over an Exchange
line programmed for the
DISA feature.
2. After you hear dial tone,
press
[PDN].
3. Enter the Remote Call
Forward-External security
code.
Strata CT Standard Telephone User Guide November 2001
#670
, then enter a
You hear ring back tone signal, then internal dial tone for
10 seconds. Try again if you hear busy tone.
See the System Administrator for DISA telephone
Note
numbers.
You hear a confirmation tone.
If a number is not dialled, the system automatically causes
the DISA Exchange line to ring at telephones as a normal
incoming call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
You hear a confirmation tone. See the System
Administrator for the access code.
Call Forward
11