In The Commonwealth Of Massachusetts; Preparing For Installation - LG LRG3097ST Installation Manual

INSTALLATION INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE INSTALLATION
INSTALLATION SAFETY INSTRUCTIONS
WARNING
• If a 30" clearance between cooking surface and
overhead combustible material or metal cabinets
cannot be maintained, protect the underside of the
cabinets above the cooktop with not less than 1/4"
insulating millboard covered with sheet metal not
less than 0.0122" thick. Clearance between the
cooking surface and protected cabinets MUST
NEVER BE LESS THAN 24 INCHES.
CAUTION
• Items of interest to children should not be stored in
cabinets above a range or on the backsplash of a
range—children climbing on the range to reach
items could be seriously injured.

IN THE COMMONWEALTH OF MASSACHUSETTS

• This product must be installed by a licensed
plumber or gas fitter.
• When using ball type gas shut-off valves, they shall
be the T-handle type.

PREPARING FOR INSTALLATION

TOOLS YOU WILL NEED
Phillips screwdriver
Flat-blade screwdriver
Pencil and ruler
• The vertical distance from the plane of the cooking
surface to the bottom of adjacent overhead
cabinets extending closer than 1" to the plane of
the range sides must not be less than 18". (See
the
manual.)
• DO NOT attempt to operate the oven of this range
during a power failure.
• When using a flexible gas connector, it must not
exceed 3 feet in length.
MATERIALS YOU MAY NEED
• Gas line shut-off valve
• Pipe joint sealant that resists action of natural and
LP gases.
• Flexible metal appliance connector (3/4" or 1/2" NPT
x 1/2" I.D.)
Open-end or
Never use an old connector when installing a new
adjustable wrench
range.
• Flare union adapter for connection to gas supply line
(3/4" or 1/2" NPT x 1/2" I.D.)
Pipe wrench(2)
• Flare union adapter for connection to pressure
(one for support)
regulator on range (1/2" NPT x 1/2" I.D.)
• Liquid leak detector or soapy water.
• Lag bolt or 1/2" O.D. sleeve anchor (for concrete
Level
floors only).
(continued)
Dimensions and Clearances illustration in this