Installing The Anti-Tip Device; Leveling The Range - LG LRG3097ST Installation Manual

10. INSTALLING THE ANTI-TIP DEVICE

LOCATING THE BRACKET USING THE
TEMPLATE.
An Anti-tip bracket is packaged with a template.
The instructions include the necessary information to
complete the installation.
Read and follow the range installation instruction
sheet (template).

11. LEVELING THE RANGE

Leg leveler
Raise
range
Spirit level
INSTALLATION INSTRUCTIONS
Lower
range
WARNING
• Range must be secured with an approved Anti-
Tip device.
• Unless properly installed, the range could be
tipped by you or a child standing, sitting or
leaning on an open door.
• After installing the Anti-Tip device, verify that
it is in place by carefully attempting to tilt the
range forward.
• This range has been designed to meet all
recognized industry tip standards for all
normal conditions.
• The installation of the Anti-Tip device must
meet all local codes for securing the
appliance.
• The use of this device does not preclude
tipping of the range when not properly
installed.
Install the oven shelves in the oven and locate the
A
range where it will be installed.
Check for levelness by placing a spirit level or a
B
cup, partially filled with water, on one of the oven
shelves. If using a spirit level, take two readings—
with the level placed diagonally first in one
direction – and then the other – .
Remove the drawer. See the "CARE AND
C
CLEANING OF THE RANGE" section in the
User's Guide. The front leveling legs can be
adjusted from the bottom and the rear legs can be
adjusted from the bottom.
Use an open-end or adjustable wrench to adjust
D
the leveling legs until the range is level.