Toshiba B-850 Owner's Manual page 86

APPENDIX 4 SYSTEM MODE
A4.4 Printer Parameter
Fine Adjustment
(Cont.)
NOTES:
The fine adjustment value
equals the sum of the fine
adjustment values set by the
PC command and this
parameter. The maximum
print tone fine adjustment
value is 10 (Thermal
Transfer Print) or +7 and –10
(Thermal Direct Print). When
the value reaches the
maximum, the value remains
unchanged even if the
subsequent fine adjustment is
performed.
This is useful when print tone
is required to be fine adjusted
e.g.) When the ribbon is
changed to different type.
Print Tone Fine Adjustment (Thermal Transfer/Thermal Direct
Print)
With this parameter you can fine adjust the Print Tone.
"<3>ADJUST SET" appears, press the [PAUSE] key 5 times to enter
the Print Tone Fine Adjustment (Thermal transfer print) menu.
To change the screen to the Print Tone Fine Adjustment (Thermal direct
print), press the [PAUSE] key again.
Thermal Transfer Print
[RESTART]
[FEED]
[FEED] key: Pressing the [FEED] key one time causes a –1 tone change,
up to –10 tones.
[RESTART] key: Pressing the [RESTART] key one time causes a +1
tone change, up to +10 tones.
After completing the fine adjustment, press the [PAUSE] key.
A4-10
A4.4 Printer Parameter Fine Adjustment
Thermal Transfer
Thermal Direct
Thermal Direct Print
Darker
Standard
Lighter
EO1-33029
When